How To Remove Mould And Limescale From Your Home
The areas of your house such as kitchen and bathrooms, which are exposed to constant moisture, face the danger of mould problems or limescale accumulation. If you take a closer look at your bathroom ceilings or kitchen corners, you are likely to find green or black spots which not only spoil the beauty of your house but can be a serious health hazard by causing allergic reactions and respiratory problems.
What are moulds?
Moulds are basically fungal growth which appear in the form of fuzzy or flat round spots. They flourish in areas with poor air circulation and low levels of natural light.
What is limescale?
The main component of limescale is calcium or magnesium carbonate. It is formed when hard water leaves behind a residue of alkaline mineral deposits. Limescale mostly accumulates on the surface of sinks, toilets, faucets, bath tubs, shower heads and shower doors.
The solution for getting rid of moulds
Install a fan or dehumidifier: Lack of proper ventilation is an invitation to mould. Placing fans will help arrest the formation of moulds by taking away excess moisture from the area. Also, allow plenty of sunlight to enter the room as dark spaces promote growth of moulds.
Check for leaks: Leaky sinks, toilets and plumbing pipes will accelerate formation of moulds. Also, monitor the walls, roof or tiles of your bathrooms for water seepage. In case, they show symptoms for the same, hire suitable methods to make them water resistant.
Keep off dampness: Soggy materials such as rugs, towels, paper products, wood, wallpaper, grout, etc., are common factors influencing mould formation. Discard them immediately.
Proper drainage: If the drain in your bathroom is letting water pool instead of draining it out, you should seriously investigate the overall structure. Ideally, the floor in a bathroom should be slightly slanted to allow water to drain automatically.
DIY solution for mould removal: Spraying a solution of hot water, soap and baking soda on the mould-affected areas and scrubbing off the surface is an inexpensive and easy technique for eliminating moulds. Mild white vinegar, borax and hydrogen peroxide are other substances which could be used for mould removal. Water and bleach in the ratio of 3:1 are another effective solution for removing moulds.
The solution for getting rid of limescale
Water softening: Since limescale (calcium carbonate) are caused due to hard water, water softening is the best and recommended solution. This is a chemical process, involving swapping of calcium for sodium.
Limescale removers: Limescale removers are now commercially available. But, if you are looking for a DIY solution, opt for a mixture of lemon juice and ordinary vinegar. The substance formed is more acidic and when applied on the surface helps in easy removal of limescale deposits.